Electric Motorized High Vacuum Angle Valve
Electric Motorized High Vacuum Angle Valve GDD
Customer's inquiry form can be directly dialed +86 (577) 86838999 to the marketing department,
or sent to the corporate email pioneertrade@163.com
Specific agreement: delivery date, whether to include tax, payment method and special requirements, etc.
Customers provide: working pressure, temperature, medium, connection method and other detailed parameters
Address: No.116 Binhai 11th Road, Jinhai 2nd Road, Longwan Konggang New District, 325000 Wenzhou China
Phone: +86 (577) 86838999
Fax: +86 (577) 86911098
Enterprise email: pioneertrade@163.com
GDD electrichigh vacuum angle valve isthrough electrical components to control valve plate moving thenturn on or shut off the vacuum airflow,the applicable media is air and non-corrosive gases.
It has two structures, one is (GDD-J) angle type and another is (GDD-S) a tee type within an ISO-KF or flange end pre-pump port.
Normally the electric motorized angle valve is rubber sealed, if need bellows or metal sealed please take a note.
The signal feedback device is passive contact type as factory setting.
Scope Of Application | 105~6.7×10-5Pa(Rubber Shaft Seal） 105~6.7×10-7Pa(Bellows Shaft Seal） |
Valve Leakage Rate | ≤1.3×10-5Pa.L/S.( Rubber Shaft Seal） ≤1.3×10-7Pa.L/S.(Bellows Shaft Seal） |
Medium Temperature | -30~+150ºC (Viton) |
Installation Status | Upright installation |
Power Supply | AC380V/50Hz Contact-type device is a passive signal |
Body、Stem、Bonnet | Carbon Steel、Stainless Steel |
Seal | NBR、Viton、Bellows |